Latest Additions to Minnesota Places
Click any photo on a page for a larger view
RF power flux density radiation levels are shown in mW/m2, or milliwatts per meter squared, potential free.
***
Some places also have peak readings listed as V/m, or volts per meter.
***
These two measurement units are not readily converted between each other because of the inconstant variations of radio waves.
***
Peak measurements cited in the reports are shown on the meter screen, in the small line of digits beneath the large numbers, after “MAX.”*
Note: the peak measurement is the result of constant fluctuation from zero measurement units to that peak value and includes all of the levels in between in short bursts.
…
Measurements listed are obtained with the meter running for two minutes at each location.
********************************************
Building Biologists’ Scale of Concern for RF (radio), LF (electromagnetic), and E (electrical) fields:
***
RF – in Milliwatts per Meter Squared
Slight 0.0001 – 0.0100
Severe 0.0100 – 1 mW
Extreme >1 mW
***
LF – In Milligauss
Slight 0.2 – 1 mG
Severe 1-5 mG
Extreme >5 mG
***
E – in Volts per Meter
Slight 0.3-1.5 V/m
Severe 1.5-10 V/m
Extreme >10 V/m
***
KEEP IN MIND that these measurements are of what is in the air. What runs through the body is HIGHER as these artificial EMFs and radiation seek ground through the nearest conductor to earth, especially water-based. If you are in their proximity, that’s YOU.
